小知识

屏幕截图

视频

评论来自 7409

Changed in 2.0.1, Deathwish now grants a 5% damage vulnerability from all sources instead of the previous 20% armor and resistance reduction. This makes it more viable for fear-hating tanks with high armor and resistance (as 20% armor from 10,000 total and 20% resistance from 400 previously resulted in -2000 armor and -80 resistances).

However, this change can be considered a nerf for PvPers, as it actually increases the spell damage taken by the warrior, instead of yielding an resistance reduction on a character with few resistances to begin with (from 10 resistance to 8 resistance).

评论来自 Thottbot

Sweeping Strikes + Cleave is the win. Using it both when you pull 2 mobs will let you hit 4 hits at a time, 2 on each target.

评论来自 Thottbot

Because you can still fight two or more things with it, have everything be in melee range, and still your attacks will only hit your target, like normal, without the buff. It also seems like the closer you can get the monsters to eachother, the more chance your sweeping strikes will work, each swing.. that was a one-time thing though, the next time it didn't work (didn't get a single sweeping strike off when surrounded by monsters)

评论来自 Thottbot

with whirlwind axe, sweeping strikes + cleave can make u solo 2 mobs 2-3 levels higher than u. very nice ability.

评论来自 Thottbot

This really work best when you use Whirlwind direct after you use Sweeping Strikes against 5 mobs then if you are just a bit luck you will get about 10 attacks on each mob...
This was testet after 1.8 and it worked 5 of 10 times or 1/2 of the time if you like...

评论来自 Thottbot

too bad you can't get Bloodthirst and Sweeping Strikes ... unless ...

评论来自 Thottbot

ok i thought you got this skill from a trainer when you did a quest but i didn't see it as a opition. How do you get this skill.

评论来自 Thottbot

This is far better than any other skill. Works like a miracle, unlike the other 2 talent skills.

评论来自 Thottbot

Heavy nerf is going to this ability now. Armor will be calculated on the targets, whereas you could hit a plate wearer with this on by hitting a squishie nearby for a bunch of damage, soon you will not be able to.

In addition, this ability received a nerf when used in conjunction with whirlwind, it now will only affect 1 target in the whirlwind.

评论来自 Thottbot

also it doenst matter if you hit the plate or the squishie.

sw and cleave still owns

评论来自 Thottbot

Does the hit on the second enemy generate rage? If it does then this pays its own rage cost.

评论来自 Thottbot

Say you sweeping strike, then heroic strike. Do both targets take heroic strike damage?

Even being a warrior, having the armor calculated on the second target seems fair and sensible, but not having the next target attacked w/ the same attack....doesn't.

Which attack is best to use w/ sweeping strikes? Since it sounds like whrilwind and cleave dont "chain" this.....wouldn't it be better to just heroic strike?

评论来自 Thottbot

I am an undead warrior on Azgalore, and I never really used this much until I saw a video of a guy using it and owning...and I decided to try it out. I did. And it's awesome. Especially with ravager axe, using whirlwind(which still works as far as I can see :D) I downed guys incredibly fast (I am 42 and fought a couple 43 mobs). Use it! It's way better than mortal strike for grinding and what not. Probably better than MS in a party as well, but maybe not for PvP. Asdferty out.

评论来自 Thottbot

Try this:

Pull 2 mobs, melee 1 down to 30% health without using any rage, hit sweeping strikes then hit execute.

:-)

评论来自 Thottbot

As of patch 1.11.0 (6/19/2006) sweeping strikes will do normal melee swing damage with execute to the second victim,

"Sweeping Strikes: This spell has a number of fixes: When used in conjunction with Execute and the second victim is below 20% health, they will be hit with the full Execute amount. If the second victim is not below 20% health, they will be hit with normal melee swing damage"

评论来自 Thottbot

is this thing broken ?
we were 2 rogues hitting a warrior my mate got hit by 1800 +1600 overpower and white dmg, both crit
and i take a sweep strike for 2100 ? why the hell do i take more damage ?
and more over, this thins should take in account that it is a crit....so that i take less damage via reslience, c'mon the guy does 7k dmg, in less than 2sec...
now i know that we have to fight the warrior one by one...but its borin, cause here we were 2 rogues vs 2 warrior, during the 1st 30sec verything was ok, we got the 1st warrior, then the 2nd one, instant take us 7k hp, what if it was that since the beginning ? c'mon, this thing should be fixed (not nerfed), but i shouldnt take 2100 dmg, that is superior than his strikes, it supposed to copy the dmg, + it should be a crit, and take resilience into account...like it did for armor

评论来自 Thottbot

rogues can do the same. i know.

评论来自 Allakhazam

if your a GM or HW this is what you need...

评论来自 Allakhazam

Does anyone else have trouble with this not actually hitting a nearby opponent? Cleave seems to work every time, but Sweeping Strikes is often a waste of Rage because I continue only to hit the enemy I'm engaged with.

链接

横扫攻击

横扫攻击

天赋

30怒气

瞬发	30秒冷却

你在接下来的5次近战攻击中可以攻击到一个额外的敌人。

魔法增益

横扫攻击

你在接下来的5次近战攻击中可以攻击到一个额外的敌人。
持续20秒

法术细节

持续时间

20秒

类型

物理

机制

n/a

驱散类型

n/a

GCD目录

n/a

成本

30怒气

范围

0码 (自身)

施法时间

瞬发

冷却

30秒

GCD

0秒

形态

战斗姿态

光环触发几率

100%

效果

Apply Aura：Dummy
价值：1
PVP 倍率：1
服务器端脚本

标记

[Is Ability]
[Do Not Sheath]

指南

Fury Warrior DPS Abilities & Rotation Guide - WoW Classic Season of Mastery Fury Warrior DPS Talents & Builds Guide – WoW Classic Season of Mastery Warrior Leveling Guide & Best Leveling Spec 1-60 - WoW Classic Warrior Tank Talents & Builds Guide – WoW Classic Season of Mastery DPS Warrior PvP Guide

横扫攻击

魔法增益

法术细节

指南

相关

贡献